Certified online course in Full Custom Layout on Cadence Tool Flow
-
- Certified online course in Full Custom Layout on Cadence Tool Flow
- Selection Criteria:– Written Test (No written test, if trainees is not opting for placement or referral program.
- Course divided into three levels:-
- Beginner : 3 months
- Intermediate : 3 months
- Expert : 3 months
Syllabus:- Available on request and trainees has to choose the level before the start of the course
- Duration: Depending on the course, will share separately after the registration and the interest of the candidates but min 3 months is always for every course.
- Prerequisites:-
- Basic knowledge of digital and analog circuits
- Semiconductor devices and fabrication
- Circuit design and analysis
- Understanding of CMOS process technology
- VLSI fundamentals
- Basic programming skills
- Who can Join:-
- Pursuing, Pass out, Freshers, Pass out with gap, and Working Professionals
- Deliverable:-
- Layout design projects
- Physical verification reports
- Design rule check (DRC) clean layouts
- Design rule manual
- Netlist extraction and simulation results
- Documentation and presentation
- Instructor & Buddy Profile:- Mentors
- Certification Test:- Yes, Trainees have to do certification after the completion of each level and max 2 attempts will be given.
- Online Training Platform:- Zoom
- Training Schedule:- Customize and fixed schedule on Weekends and Weekdays (Late evening)
- Placement assistance /Referral:-Yes
- Registration Link:- Register Now
- Terms & Conditions agreement and NDA:- Yes, Trainees have to sign the required doc
- Fees:- Flexible and on a monthly basis and CFPL is not available in Online Training Program
- Testimonials:- Click Here
Certified online course in IP & SOC Design & Verification
- Certified online course in IP & SOC Design & Verification
- Selection Criteria:- Written Test (No written test, if trainees is not opting for placement or referral program.
- Course divided into three levels:-
- Beginner : 3 months
- Intermediate : 3 months
- Expert : 3 months
Syllabus:- Available on request and trainees has to choose the level before the start of the course
- Duration: Depending on the course, will share separately after the registration and the interest of the candidates but min 3 months is always for every course.
- Prerequisites:-
- Digital design fundamentals
- Integrated circuit fundamentals
- Hardware description languages (HDLs)
- Computer architecture
- VLSI fundamentals
- Basic programming skills C & C++
- Who can Join:-
- Pursuing, Pass out, Freshers, Pass out with gap, and Working Professionals
- Deliverable:-
- IP & SOC Design Project
- Verification Test Bench & Reports
- Bus & protocols projects
- Instructor & Buddy Profile:- Mentors
- Certification Test:- Yes, Trainees have to do certification after the completion of each level and max 2 attempts will be given.
- Online Training Platform:- Zoom
- Training Schedule: Customize and fixed schedule on Weekends and Weekdays (Late evening)
- Placement assistance /Referral:-Yes
- Registration Link:- Register Now
- Terms & Conditions agreement and NDA: Yes, Trainees have to sign the required doc
- Fees: Flexible and on a monthly basis and CFPL is not available in Online Training Program
- Testimonials:- Click Now
Certified online course in STA, Synthesis & Physical Design on cadence tool flow
Certified online course in STA, Synthesis & Physical Design on cadence tool flow
Selection Criteria:- Written Test (No written test, if trainees is not opting for placement or referral program.
- Course divided into three level:-
- Beginner : 3 months
- Intermediate : 3 months
- Expert : 3 months
Syllabus:- Available on request and trainees has to choose the level before the start of the course
- Duration: Depending on the course, will share separately after the registration and the interest of the candidates but min 3 months is always for every course.
- Prerequisites:-
- Digital design fundamentals
- Integrated circuit fundamentals
- Hardware description languages (HDLs)
- Basic Timing Concepts
- Computer-aided design (CAD) tools
- Timing constraints
- Digital circuit simulation
- Who can Join:-
- Pursuing, Pass out, Freshers, Pass out with gap, and Working Professionals
- Deliverable:-
- Introduction to Physical Design, STA, and Synthesis
- Floor planning
- Placement
- Routing
- Clock Tree Synthesis
- Power Planning & Analysis
- Physical Verification
- Design for Manufacturing
- Instructor & Buddy Profile:- Mentors
- Certification Test:- Yes, Trainees has to do certification after the completion of each level and max 2 attempts will be given.
- Online Training Platform:- Zoom
- Training Schedule: Customize and fixed schedule at Weekends and Weekdays (Late evening)
- Placement assistance /Referral:-Yes
- Registration Link:- Register Now
- Terms & Conditions agreement and NDA: Yes, Trainees has to sign the required doc
- Fees: Flexible and on a monthly basis and CFPL is not available in Online Training Program
- Testimonials:- Click Now
Certified online course in DFT on cadence tool flow
Certified online course in DFT on cadence tool flow
Selection Criteria:- Written Test (No written test, if trainees is not opting for placement or referral program.
- Course divided into three level:-
- Beginner : 3 months
- Intermediate : 3 months
- Expert : 3 months
Syllabus:- Available on request and trainees has to choose the level before the starting of the course
- Duration: Depending on the course, will share separately after the registration and the interest of the candidates but min 3 months is always for every course.
- Prerequisites :-
- Digital design fundamentals
- Integrated circuit fundamentals
- Hardware description languages (HDLs)
- Basic Timing Concepts
- Computer-aided design (CAD) tools
- Timing constraints
- Digital circuit simulation
- Basic Testing Concept
- Who can Join:-
- Pursuing, Pass out, Freshers, Pass out with gap and Working Professionals
- Deliverable:-
- Introduction to DFT
- Test Fundamentals
- DFT Techniques
- Testability Analysis
- Test Pattern Generation
- Design for Testability Guidelines
- Design Verification for Test
- Manufacturing Test
- Instructor & Buddy Profile :- Mentors
- Certification Test:- Yes, Trainees has to do certification after the completion of each level and max 2 attempt will be given.
- Online Training Platform:- Zoom
- Training Schedule: Customize and fixed schedule at Weekends and Weekdays (Late evening)
- Placement assistance /Referral:-Yes
- Registration Link:- Register Now
- Terms & Conditions agreement and NDA: Yes , Trainees has to sign the required doc
- Fees: Flexible and on a monthly basis and CFPL is not available in Online Training Program
- Testimonials:- Click Now
Certified online course in FPGA Embedded System Design
- Certified online course in FPGA Embedded System Design
- Selection Criteria:- Written Test (No written test, if trainees is not opting for placement or referral program.
- Course divided into three level:-
- Beginner : 3 months
- Intermediate : 3 months
- Expert : 3 months
Syllabus:- Available on request and trainees has to choose the level before the start of the course
- Prerequisites:-
- Digital design fundamentals
- Hardware description languages (HDLs)
- Basic Programming Skills – C & C++
- Understanding of Communication Protocols
- Digital System Design Flow
- Knowledge of Real-Time Systems
- Computer Architecture
- Familiarity with FPGA Development Tools
- Who can Join:-
- Pursuing, Pass out, Freshers, Pass out with gap, and Working Professionals
- Deliverable:-
- Introduction to Embedded Systems
- FPGA Architecture and Embedded Systems
- FPGA Architecture
- Hardware Description Languages (HDLs) for Embedded Systems
- Embedded System Design Flow
- Processor Cores for FPGAs
- Memory Subsystem Design
- Embedded Software Development
- System-on-Chip (SoC) Design
- Interfacing with Peripherals
- Real-Time Systems and Operating Systems
- Instructor & Buddy Profile:- Mentors
- Certification Test:- Yes, Trainees have to do certification after the completion of each level and max 2 attempts will be given.
- Online Training Platform:- Zoom
- Training Schedule: Customize and fixed schedule at Weekends and Weekdays (Late evening)
- Placement assistance /Referral:-Yes
- Registration Link:- Register Now
- Terms & Conditions agreement and NDA: Yes, Trainees have to sign the required doc
- Fees: Flexible and on a monthly basis and CFPL is not available in Online Training Program
- Testimonials:- Click Now
Certified online course in FPGA DSP System Design
Certified online course in FPGA DSP System Design
Selection Criteria:- Written Test (No written test, if trainees is not opting for placement or referral program.
- Course divided into three level:-
- Beginner : 3 months
- Intermediate : 3 months
- Expert : 3 months
Syllabus:- Available on request and trainees has to choose the level before the start of the course
- Prerequisites:-
- Digital design fundamentals
- Hardware description languages (HDLs)
- Digital Signal Processing (DSP) Fundamentals
- Understanding of Communication Protocols
- Digital System Design Flow
- Signal Processing Algorithms
- Understanding of Communication Protocols
- Familiarity with FPGA Development Tools
- Knowledge of Fixed-Point Arithmetic
- Who can Join:-
- Pursuing, Pass out, Freshers, Pass out with gap, and Working Professionals
- Deliverable:-
- Introduction to Digital Signal Processing (DSP)
- FPGA Architecture for DSP
- Hardware Description Languages (HDLs) for DSP
- DSP Algorithm Implementation
- Fixed-Point Arithmetic
- DSP System Design Flow
- FPGA-Based DSP Architectures
- Performance Optimization
- System-on-Chip (SoC) Design
- Interfacing with Peripherals
- Verification and Testing
- Instructor & Buddy Profile:- Mentors
- Certification Test:- Yes, Trainees has to do certification after the completion of each level and max 2 attempts will be given.
- Online Training Platform:- Zoom
- Training Schedule: Customize and fixed schedule at Weekends and Weekdays (Late evening)
- Placement assistance /Referral:-Yes
- Registration Link:- Register Now
- Terms & Conditions agreement and NDA: Yes, Trainees has to sign the required doc
- Fees: Flexible and on a monthly basis and CFPL is not available in Online Training Program
- Testimonials:- Click Now
Certified online course in Embedded System Design
- Certified online course in Embedded System Design
- Selection Criteria:- Written Test (No written test, if trainees is not opting for placement or referral program.
- Course divided into three level:-
- Beginner : 3 months
- Intermediate : 3 months
- Expert : 3 months
Syllabus:- Available on request and trainees has to choose the level before the start of the course
- Prerequisites:-
- Programming Skills
- Digital Electronics
- Microcontrollers/Microprocessors
- Circuit Design
- Data Structures and Algorithms
- Operating Systems Concepts
- Electronics Protocols and Interfaces
- Who can Join:-
- Pursuing, Pass out , Freshers, Pass out with gap, and Working Professionals
- Deliverable:-
- Introduction to Embedded Systems
- Embedded System Hardware
- Embedded System Software
- Real-Time Operating Systems (RTOS)
- Embedded System Architecture
- Embedded System Interfacing
- Embedded System Design Methodologies
- Embedded System Debugging and Testing
- Power Optimization in Embedded Systems
- Embedded System Security
- Instructor & Buddy Profile:- Mentors
- Certification Test:- Yes, Trainees have to do certification after the completion of each level and max 2 attempts will be given.
- Online Training Platform:- Zoom
- Training Schedule: Customize and fixed schedule at Weekends and Weekdays (Late evening)
- Placement assistance /Referral:-Yes
- Registration Link:- Register Now
- Terms & Conditions agreement and NDA: Yes, Trainees have to sign the required doc
- Fees: Flexible and on a monthly basis and CFPL is not available in Online Training Program
- Testimonials:- Click Now
Certified online course in PCB System Design
Certified online course in PCB System Design
Selection Criteria:- Written Test (No written test, if trainees is not opting for placement or referral program.
- Course divided into three level:-
- Beginner : 3 months
- Intermediate : 3 months
- Expert : 3 months
Syllabus:- Available on request and trainees has to choose the level before the starting of the course
- Prerequisites:-
- Basic Electronics
- Circuit Design
- Electronics Prototyping:
- PCB Manufacturing Processes
- Schematic Capture Tools
- PCB Layout Design
- Design Rules and Constraints
- CAD Tools for PCB Design
- Basic Mechanical Design
- Who can Join:-
- Pursuing, Pass out, Freshers, Pass out with gap, and Working Professionals
- Deliverable:-
- Introduction to PCB Design
- Schematic Capture
- PCB Layout Design
- Design Rules and Constraints
- PCB Design Software
- PCB Manufacturing Processes
- Signal Integrity Analysis:
- Design for Manufacturing (DFM) and Design for Testability (DFT):
- PCB Assembly and Testing
- Instructor & Buddy Profile:- Mentors
- Certification Test:- Yes, Trainees has to do certification after the completion of each level and max 2 attempt will be given.
- Online Training Platform:- Zoom
- Training Schedule: Customize and fixed schedule at Weekends and Weekdays (Late evening)
- Placement assistance /Referral:-Yes
- Registration Link:- Register Now
- Terms & Conditions agreement and NDA: Yes, Trainees has to sign the required doc
- Fees: Flexible and on a monthly basis and CFPL is not available in Online Training Program
- Testimonials:- Click Now
- Certified online course in Scripting (Automation) for VLSI & Hardware Design
- Unix /Commands
Prerequisites:-
- Basic Programming Skills
- Knowledge of C & C++
Deliverable:-
- File System Navigation
- File and Directory Operations
- File Manipulation
- File Permissions
- Process Management
- Text Processing
- File Compression and Archiving
- Networking
- Shell Scripting
- Bash Scripting
Prerequisites:-
- Basic Programming Skills
- Knowledge of C & C++
Deliverable:-
- Script Structure
- Variables
- Control Flow
- Functions
- Command Line Arguments
- Input and Output
- String Manipulation
- Arithmetic Operations
- Error Handling
- File Operations
- TCL/TK
Prerequisites:-
- Basic Programming Skills
- Knowledge of C & C++
Deliverable:-
- Tcl Language Basics
- Tk Widgets
- Event-Driven Programming
- Layout Management
- Dialogs and Message Boxes
- Interacting with External Programs
- File Operations
- Error Handling
- Procedure Definition and Script Organization
- Interfacing with Other Languages
- File Operations
- Perl
Prerequisites:-
- Basic Programming Skills
- Knowledge of C & C++
Deliverable:-
- Syntax and Language Basics
- String Manipulation
- File Handling
- Regular Expressions
- Data Structures
- Object-Oriented Programming (OOP)
- Modules and Libraries
- Python
Prerequisites:-
- Basic Programming Skills
- Knowledge of C & C++
Deliverable:-
- Syntax and Language Basics
- Data Structures
- File Handling
- Object-Oriented Programming (OOP)
- Modules and Packages
- Strings and Text Processing
- Error Handling and Exception Handling
- Data Analysis and Visualization
- Cadence Skill Programming Language
Prerequisites:-
- Knowledge of Unix/Bash/Tcl/TK
- ASIC Design and Layout
Deliverable:-
- Language Basics
- Accessing and Manipulating Design Data
- Scripting Design Flows
- Customizing Cadence Tools
- Scripting Design Rule Checks (DRC) and Layout vs. Schematic (LVS)
- Advanced-Data Manipulation
- Scripting Design Verification and Analysis
- Interfacing with Other Programming Languages
- Error Handling and Debugging
- Selection Criteria:- Written Test (No written test, if trainees is not opting for placement or referral program.
- Course divided into three level:-
- Beginner : 3 months
- Intermediate : 3 months
- Expert : 3 months
Syllabus:- Available on request and trainees has to choose the level before the start of the course
- Duration: Depending on the course, will share separately after the registration and the interest of the candidates but min 3 months is always for every course.
- Who can Join:-
- Pursuing, Pass out, Freshers, Pass out with gap, and Working Professionals
- Instructor & Buddy Profile:- Mentors
- Certification Test:- Yes, Trainees have to do certification after the completion of each level and max 2 attempts will be given.
- Online Training Platform:- Zoom
- Training Schedule: Customize and fixed schedule at Weekends and Weekdays (Late evening)
- Placement assistance /Referral:-Yes
- Registration Link:- Register Now
- Terms & Conditions agreement and NDA: Yes, Trainees have to sign the required doc
- Fees: Flexible and on a monthly basis and CFPL is not available in Online Training Program
- Testimonials:- Click Now
- Certified online course in Aptitude || Puzzle || Digital || EDC || RC & Network required for Written Test and Interview in Semiconductor Industry
- Selection Criteria:- Open for all
- Course divided into three levels:-
- Beginner : 3 months
- Intermediate : 3 months
- Expert : 3 months
Syllabus:- Available on request and trainees has to choose the level before the start of the course
- Duration: Depending on the course, will share separately after the registration and the interest of the candidates but min 3 months is always for every course.
- Prerequisites:-
- Basic Mathematical Skills
- Logical Reasoning
- English Language Proficiency
- Familiarity with Semiconductor Industry
- Basics of Analog and Digital Electronics
- Who can Join:-
- Pursuing, Pass out, Freshers, Pass out with gap.
- Deliverable:-
- Online Course Materials
- Online Support
- Assignments and Assessments
- Interactive Learning Activities
- Certification of Completion
- Instructor & Buddy Profile:- Mentors
- Certification Test:- Yes, Trainees have to do certification after the completion of each level and max 2 attempts will be given.
- Online Training Platform:- Zoom
- Training Schedule: Customize and fixed schedule on Weekends and Weekdays (Late evening)
- Placement assistance /Referral:-Yes
- Registration Link:- Register Now
- Terms & Conditions agreement and NDA: Yes, Trainees have to sign the required doc
- Fees: Flexible and on a monthly basis and CFPL is not available in Online Training Program
- Testimonials:- Click Now
